Zipp Manufacturing Bullitt Thunderboat, Building Instructions

Page: 6 / 55

R I V E T T / R O C K E T T
4
Additional items needed to complete:

Gasoline engine with 5 inch mounts

.250 Collet for engine (Zipp 3440)
 .250 36 inch cable w/welded stub shaft (Zipp 3445)

Tuned pipe (Zipp 2011)
 2 channel surface radio with 1 standard and 1 heavy duty servo (100 in/oz minimum)

Throttle pushrod (2-56 or 4-40 Size) with Clevises (Zipp 3462 and 3459)
 2- 4-40x12 Pushrods (Zipp 3463)
 ¼” OD carbon pushrod

2 pushrod seals (Zipp 3404 or 3422)
 16 ounce Fuel Tank or IV Bag(gasoline compatible)

.250 strut (Zipp 3416)
 .250 drive dog (Zipp 3442 or 3448)

6518/3 or 6717/3 prop (Zipp 4003)
 Prop nuts (Zipp 3450)

Engine Mounts (Zipp 3409 for Zenoah)
 Cable grease

Large rudder (water pickup type) (Zipp 3413)

5 feet large silicone tubing (water line) (Zipp 3461)
 12 inch length of 11/32 brass tubing (Zipp 3453)

36 inch length of 5/16 brass tubing (Zipp 3452)
 Floatation (pool noodles, foam, etc.)
Before we can start building, we need to do some prep work. Good prep work will pay off later
with a straight, true running boat.