BUILT-IN IR CODE LIBRARY
The Built-in IR code library supports most of the popular air conditioner brands in the
market. Z-Wave gateway and controller does not need to have any IR control code knowledge.
User can use ZWave controller or gateway to select the IR code according to the ZXT-120 code
list separately provided through Z-Wave configuration
command.
GLOSSARY
DEVICE OR
NODE
Devices and nodes are all terms to describe anindividual Z-Wave device. These are
allinterchangeable when setting up your Z-Wavenetwork.
INCLUSION
Add a Z-Wave device to the network.
EXCLUSION
Delete a Z-Wave device from the network.
REMOVE
To take a device out of a group, scene or association group while that device still exists in the same
Z-Wave network.
Z-WAVE
NETWORK
A collection of Z-Wave devices is controlled by primary and secondary controllers operating on the
same system. A Z-Wave network has its own unique ID code so that controllers not in the network
cannot control the system.
PRIMARY
CONTROLLER
The first controller is used to set up your devices and network. Only the Primary Controller can be
used to include or delete devices from a network. It is recommendedthat you mark the primary
controller for each network for ease in modifying your network.
SECONDARY
CONTROLLER
A controller containing network information about other devices within the network and is used
for controlling devices. Secondary controller is created from the Primary Controller and cannot
include or delete devices to the network.
INCLUSION
CONTROLLER
A controller containing network information about other devices within the network and is used for
controlling devices. Inclusion controller is created from the Primary Controller in a SIS enabled Z‐
Wave network. Inclusion Controllers have the ability to add and remove devices from the network.
07
IR EXTENDER
QUICK INSTALLATION GUIDE
06
IR EXTENDER
QUICK INSTALLATION GUIDE
www.zipato.com
www.zipato.com
