How to select my air-conditioner IR code from ZXT-120?
You should refer to the code list and look into the brand and try the code no.
sequentially until you find the right code. You can record down your device code
under the table for future reference after setting up the ZXT-120 correctly.
ZXT-120 is working on top and 4-directions IR output, but there is no response on
the IR emitter socket, why?
ZXT-120 supports two IR power levels for the external IR emitter to avoid saturation
of the IR receiver. You can set the IR output power level by the Parameter Table value
(normal or high power mode) or adjust the position of your external IR emitter.
Can I use 2 or more ZXT-120 in my house? What is the max. units if yes?
Yes and it is very depend on the capability of gateway / controller. For example,
gateway can supports up to 8, 16 or 32 ZXT-120 in a network.
How to avoid the IR interference if I am using 2 identical air conditioners in same
location but want to control them individually?
User can disable the Surround IR Output function, connect the external IR emitter
and aim it at the specific AC unit. The operating distance of external IR emitter is
around 100cm (High power mode) and 50cm (Low power mode) but it is also depends
on the sensitivity of the IR receiver.
27
IR EXTENDER
QUICK INSTALLATION GUIDE
26
IR EXTENDER
QUICK INSTALLATION GUIDE
www.zipato.com
www.zipato.com
