The ZXT-120 is a Z-Wave to IR extender for air-conditioner (AC), (Figure 1), it works
with any Z-Wave compliant gateway or controller by translating Z-Wave Thermostat
Commands to AC IR control code. User can select the IR code from the built-in
code library of ZXT-120, or use learning function, by using Z-Wave Configuration
Commands according to the parameter table. ZXT-120 is also with built-in
temperature sensor which allows gateway or controller to get the current room
temperature.
ZXT-120 can be configured as either “Frequently Listening Routing Slaves” (FLiRS)
or “Always Listening” node after exclusion process (before inclusion process).
FLiRS node type is for battery operated applications and it will enter sleep mode
frequently in order to conserve battery consumption that can provide the flexibility if
there is out of 5Vdc power source. Also, user can place the unit in anywhere at home.
INTRODUCTION
Figure 1 ZXT-120
05
IR EXTENDER
QUICK INSTALLATION GUIDE
04
IR EXTENDER
QUICK INSTALLATION GUIDE
www.zipato.com
www.zipato.com
