How to switch ZXT-120 listening mode from “Always Listening” to
“FLiRS” (or vice verse)
Step
Setup Key
LED Indication Status
on ZXT-120
1
Press and hold the PROG
button on the ZXT-120 for
around 5 seconds
LED turns ON after PROG key hold
for 5 seconds
2
Release the button and then
press the PROG button 3
times within 2 seconds
LED flashes twice then stays off
(ZXT-120 set in FLiRS mode)
OR
LED flashes four times then stays off
(ZXT-120 set in Always Listening
mode)
Inclusion/Exclusion
Step
Setup Key
LED Indication Status on ZXT-120
1
Refer to your primary controller
instructions to process the
inclusion/ exclusion setup
procedure.
-
2
When prompted by your
primary controller, click once
on the PROG button
LED flashes once then stay off (ZXT-120 will
report the supported command class)
The primary controller should indicate that the action was successful. If the controller
indicates the action was unsuccessful, please repeat the procedure.
15
IR EXTENDER
QUICK INSTALLATION GUIDE
14
IR EXTENDER
QUICK INSTALLATION GUIDE
www.zipato.com
www.zipato.com
