Alerting
When Safety alarm has been triggered you will be alerted by an emergency PHONE CALL (your mobile number
will be used). At the same time, you will get an EMAIL ALERT with 2 photos attached from the built in camera.
You can change alerting setup from within Safety alarm settings.
Alerting messages will only be sent if ZipaTile is connected to the Internet.
Settings
Safety alarm settings you can find within Zipato admin portal at my.zipato.com. Go to Security > Safety
alarm. In order to setup your system properly, you have to have an active Internet connection.
Elderly care alarm
Elderly care alarm is working quite similar to Intruder alarm. However, compared to the Intruder alarm, Elderly
care alarm system is triggered in an opposite way. Instead of being triggered when a ZONE detects some activity,
Elderly care alarm will be triggered when not even one zone detects any activity for a certain period of time
(default period of time is 15 minutes).
Alerting messages will only be sent if ZipaTile is connected to the Internet.
Settings
Safety alarm settings you can find within Zipato admin portal at my.zipato.com. Go to Security > Safety
alarm. In order to setup your system properly, you have to have an active Internet connection.
Smart Thermostat
ZipaTile is the fully featured thermostat unit. However, since there are many types of heating/cooling
systems out there, ZipaTile should be specially adjusted for each particular setup.
Device Manager
Depending on the communication protocol supported (ZigBee, Z-Wave…), ZipaTile can connect and control
various smart devices in your home. This way you can use ZipaTile to control your lights, blinds, curtains, read
status of meters, sensors etc…
You can also create ROOMS in Zipato DEVICES and assign a room to each device. This way you can easily find and
manage devices within one room.
GO TO HOME PAGE > DEVICES
or
GO TO HOME PAGE > ROOMS
In order to connect smart device based on certain communication protocol (Z-Wave, ZigBee…) go to
DEVICES -> SETTINGS -> ADD NEW DEVICE
Scenes
When using your ZipaTile for controller your lights, curtains, blinds etc…, you can use SCENES application in
order to control your devices faster and easier.
