4
Setting up the Zipabox
To be able to connect to the Zipabox it first needs to be set up. To set up a Zipabox follow these steps:
•
Attach the antenna to the top of the controller. The antenna will be provided in the packaging
•
Attach additional modules to the box (OPTIONAL, Zipabox comes with a Z-
Wave™
module
installed, other modules need to be purchased separately)
•
Connect the Zipabox to your home network via Ethernet
•
Connect the Zipabox to its power supply (an adapter will be provided in the packaging)
•
The light on the Zipabox should turn on now, if the light is not glowing something is wrong
with the power supply
The light on the Zipabox tells the user of its current status:
•
Stable red
–
online but the controller software is not running, if this persists restart the
controller by h
olding “Button 2” for 5 seconds
.
•
Blue
–
Zipabox is booting, wait until it is booted.
•
Blinking green
–
Zipabox is booted and controller software is running but there is no
connection to the cloud. If this persists check the Ethernet connection.
•
Stable green
–
Zipabox is booted and ready to use.
At any time the Zipabox can be reset by holding “Button 2” for 5 seconds.
If the light is stable green the Zipabox is ready for use. Now it is possible to add it to your system in the
Web UI or control it if it is already added.
The Web UI can be found on the following link:
https://my3.zipato.com/zipato-web/app2dashboard