18
SmartStart
SmartStart allows the devices to be automatically included into the network when they power on. For
SmartStart to be able to add devices in such a way the devices need to be on the provisioning list of
the controller. To add a device to the provisioning
list the “ADD CODE” option must
be used:
Image 30 Add SmartStart code
A new window should open, it allows the user to enter the name for the device and a choice of either
the numeric representation of the QR code or the DSK:
Image 31 SmartStart code window
Keep in mind that either code
OR
DSK need to be entered, entering them both is not necessary. After
filling the required fields
the “Add” button will add the
code into the provisioning list. Now the device
should get automatically included into the network when it powers on.
The “GET CODES” button gets the list of all of the devices added to the provisioning list. Here they can
be viewed or removed from the provisioning list:
Image 32 Get codes button