19
Image 33 SmartStart provisioning list
The provisioning list contains the code used to add the device, its name and when was it added to
the list. The red
“
X
”
button on the right side of the window removes the current row from the
controllers provisioning list:
Image 34 Remove from provisioning list
Removing a device from the provisioning list will stop it from being automatically included when it
powers on.
Identify
It is possible to make the controller identify itself by pressing the “INDICATE”
button:
Image 35 Indicate button
This option is used to identify the controller if multiple of them are present within the network. It will
make the controller light blink 3 times.
To identify the controller without using the UI send the
“
Indicator Command Class
”
command
“Indicator Set”
with
“Indicator ID” set to 0x50
(Node Identify).