13
806393 v1.08 09.19 Micro Install Instructions
Tips for hose connection
• Push the silicone hose over the
connector for a minimum of 15mm.
• Ensure there a constant fall from the
tap down to the command centre.
• Hoses must be trimmed to avoid
loops and kinks. Take care when
positioning before cutting and
make a clean cut straight across the
hose, using a sharp blade.
• The hoses must not be under
tension when installed.
• Hoses must not be lengthened
beyond the maximum supplied
1-metre length.
MAINS IN
CHILLED OUT
BOILING OUT
VENT
MAINS IN
VENT
BOILING OUT
(BC MODEL)
CHILLED OUT
Installation instructions
4
Remove caps from the connectors at the top of the command centre.
Connect the silicone hoses from the tap to the command centre. Refer
to the installation layout diagram overleaf.
BOILING OUT
Red silicone hose
(BC Model)
CHILLED OUT
Blue silicone hose
MAINS IN
Braided hose
VENT
Clear silicone hose