16
807066 v1.00 03.21 HBP AB Install Instructions
Step 7 – Tap operation
The Hydroboil is fitted with a two-way, cool-touch tap.
Boiling water will be dispensed
Press lever to dispense boiling
water.
!
Push to lock for continuous flow.
If lever does not lock, rotate it 180°
before dispensing.
Ensure the red lock button on the
right hand side of the control panel
is in a depressed position. If not,
push the button and simultaneous-
ly rotate it 90°. The button should
remain depressed.
Normal operation
(for filling cups and small containers)
Gently push the tap inwards. Boiling water will flow until the tap is released.
Continuous operation
(for filling larger containers)
Lift the tap until it locks in a horizontal position. Boiling water will flow until the
tap is returned to its normal closed position. This allows a vessel to be filled
without holding your hand where it may be affected by steam.
7.1
7.2 Tap operation: Hydroboil Plus
Tap operation: Autoboil
