background image

9

Installation instructions & user manual

 

9120-34379 v1.20 Okt 2022 - ZIP DCX Next

Technical support 

 

Tel: 0345 6 005 005 email: [email protected]  www.zipwater.co.uk

6. Warranty

The Zip appliance you have chosen is precision-built from the finest materials available and should give many years of trouble free 

service .
Certain warranties may be implied by law into your contract with Zip . The warranty provided below is additional to these implied 

warranties and nothing set out below shall limit your statutory rights or rights at law .
Zip Water UK warrants that, should any part fail within 12 calendar months of installation, that part will be repaired or replaced free 

of charge by Zip or its Distributor or Service Provider, except as set out below, provided the appliance is installed and used strictly 

in accordance with the instructions supplied, and that failure is not due to accident, misuse, abuse, unsuitable water conditions, or to 

any alteration, modification or repair by any party not expressly nominated by Zip .
No costs are payable by the customer other than any mileage or travelling-time charges incurred by a Zip Service Provider or the 

cost of removal, cartage and re-installation of any component of the appliance if it needs to be returned for repair to Zip or its 

Distributor .
This warranty does not cover damage resulting from non-operation of the appliance or consequential damage to any other goods, 

furnishings or property .
Zip does not exclude, restrict or modify any liability that cannot be excluded, restricted or modified or which cannot, except to a 

limited extent, be excluded, restricted or modified as between the owner or user and Zip under the laws applicable .
Furthermore, this warranty does not displace any statutory warranty, but, to the extent to which Zip is entitled to do so, the liability 

of Zip under any statutory warranty will be limited at Zip’s option to the replacement of the appliance or supply of equivalent appli-

ance, the payment of the cost of replacing the appliance or acquiring an equivalent appliance, or the payment of the cost of having 

the appliance repaired or the repair of the appliance .
Note It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component 

parts without prior notice .
To ensure you have the latest revision of this instruction manual, please visit www .zipwater .co .uk to download the latest copy .

IMPORTANT 

No liability is accepted for incorrect use of this product .

Summary of Contents for InLine DCX Next





















Reviews: