X11 Wireless Broadband Router User manual
Page 31 of 69
5.3 Checking PC’s IP and Connection with the Router
After configuring the TCP/IP protocol, use the ping command to verify if the
computer can communicate with the Router. To execute the ping command,
open the DOS window and PING the IP address of the Wireless Broadband
Router at the DOS prompt:
z
For Windows 98/Me: Start -> Run. Type
“command”
and click OK.
z
For Windows 2000/XP: Start -> Run. Type
“cmd”
and click OK
.
At the DOS prompt, type the following command:
If the Command window returns something similar to the following:
Figure 15
Then the connection between the router and your computer has been
successfully established.
If the computer fails to connect to the router, the Command window will return
the following:
