8
OPERATING RANGE
Please notice the scooter can travel a distance of 18.6 miles / 30km on a fully charged battery in ideal conditions.
The following are some of the major factors that will affect the operating range of your scooter.
Terrain: A smooth, flat surface will increase your driving distance, while driving uphill, as well as rough or uneven terrain
will reduce your distance significantly.
Weight: The weight of the user can affect driving distance, a lighter user will have further range than a heavier user.
Ambient temperature: Please ride and store the scooter under recommended temperatures, which will increase driving
distance, battery life, and overall performance of your scooter.
Maintenance: Reasonable battery charging and maintenance will increase the distance. Overcharging the battery can
reduce range.
Speed and Driving Style: Maintaining a moderate speed will increase your distance; while travelling at high speeds for
extended periods, frequent starts, stops, idling, along with frequent acceleration and deceleration will reduce your
overall distance.
For user safety and to prolong the life of your battery, as well as improve battery performance, please follow these
instructions.
Step 1: Ensure your scooter is turned off before you attempt to charge the battery.
Step 2: Ensure that the charging port is clean and dry.
Step 3: Plug the charger into the power socket, then connect the cable with the power supply (100V
〜
240V;
50/60Hz), make sure the light on the charger is lit GREEN.
Step 4: Put the male DC connector plug into the charging port of the scooter. The indicator light on the charger
should change to RED, indicating that your scooter is now being charged. When the RED indicator light on
your charger turns to GREEN then your scooter is fully charged. A full charge typically occurs at 5.5 hours.
Step 5: Please unplug the charger from your scooter and from the power outlet. Please ensure you put the charging
port cover back in place to cover the charging port once the battery is charged, before you use the scooter.
CHARGING THE BATTERY
IMPORTANT NOTES ABOUT CHARGING
Plug the power adapter
into the charging port
Open the rubber flap
Fasten the rubber flap
after charging.
Need Help? Visit our website for product support www.zincsports.com or email our customer service team
If the green light on your charger does not turn RED when you plug it into your scooter, it could mean you have to check the cables to ensure
you have a proper connection; or that your scooter is already fully charged.
• Do not overcharge as this will affect the life of the battery and may cause overheating which can lead to a fire hazard. Never charge near
flammable materials or liquids.
• The best charging temperatures are between 0°C~40°C. Extreme cold and extreme heat will prevent your battery from charging fully.
• Make sure to unplug your charger before standing on or operating your scooter, as this can be very dangerous.
• Use only the charger and charging cable supplied by Hy-Pro. Use of any other charger or cable may lead to damage to the product,
overheating and risk of fire. Use of any other charger or cable voids the warranty. If you spot any signs of wear and tear or damage,
visit our website at http://www.zincsports.com or contact us at [email protected] to buy a replacement charger.
• The charger is not a toy, it should be operated by an adult.
• Once your scooter has been charged, unplug the charger from the wall outlet and then from the scooter. Do not leave the scooter on charge
overnight and do not leave the scooter unattended whilst on charge.
• Ensure you have working smoke alarms on every floor of your home and in the room where you charge the scooter.
• In an ideal situation, you would have somewhere secure to store/charge your scooter, such as a shed or garage. It would also be desirable
for this area to have plugs where you can charge your scooter.