HARDWARE MAINTENANCE
10
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY DAMAGE YOUR PRODUCT
AND VOID WARRANTY.
WARNING! -
INSPECTION, MAINTENANCE, AND STORAGE
Your scooter requires routine inspection and maintenance, it is a factor of safety. This chapter describes maintenance
steps and important operating tips. Before you perform the following operations, ensure the power and charging
cables are disconnected.
INSPECTING AND CLEANING YOUR SCOOTER
- Routinely check the body of the scooter and tyres for damage or excessive wear.
- The self-tightening nuts as well as the other self-tightening fastenings may lose their efficiency and that they may
need to be retightened (Average value is 15N·m).
- Wet a clean cloth with clean water, rinse the cloth thoroughly, and wipe the body of the scooter making sure that
water does not get into the power button, charging port or tyres. If water or other liquids enter the scooter, it will
cause permanent damage to the internal components.
BRAKE
Check the brakes function properly.
A) When the hand brake is applied, the power should be cut and the motor will stop working.
B) Make sure the wheels are able to rotate freely, without getting stuck/any stopping when the brake is not applied.
FRAME, FORK AND STEERING SYSTEM
Check the frame, fork and steering system for cracks or loose connections. Check all connection elements (such as a
folding system) are correctly tightened and not broken. It is necessary and important to check the tightening of the
various bolted elements regularly.
WHEELS, TYRES
Wear and tear is unavoidable in the wheels and the driving system in the course of operation. The wheels are inflatable,
the maximum tyre pressure is 3.5bar (50psi). The user must regularly check the wheels and the driving system for
wearing and make adjustments or replacements when necessary. Please make sure the wheels are able to rotate
freely, without getting stuck/stopping when the brake is not applied. It is suggested to add lubricant (30SAE lubricating
oil is recommended) to the moving parts every 6 months.
BATTERY
Always switch off the power when the scooter is not in use. Never store the scooter at a low temperature, it may
damage or degrade the battery permanently.
CHARGER
The charger supplied with the scooter should be regularly examined for damage to the cord, plug, enclosure and other
parts. In the event of such damage the scooter must not be charged until the charger has been repaired or replaced.
STORING THE SCOOTER
- Fully charge your battery before storing.
- If you are storing your scooter for an extended period of time, please fully charge your scooter at least once every
month.
- If the ambient temperature of the storage location is below 0°C, please do not charge. You must bring the scooter into
a warmer environment before charging.
- Check under Battery Specifications for more details.
- Store your scooter indoors, in a dry and suitable temperature.
Need Help? Visit our website for product support www.zincsports.com or email our customer service team