Adult assembly required.
The tyres should have good air pressure, but some air may have escaped.
Please inflate the tyres if they do not have enough air pressure.
Allow at least 5.5 hours for initial charge. By not doing so you will invalidate the warranty.
5
ASSEMBLY:
- Assembly can typically be completed in up to 10 minutes, not including the initial charge time.
- Time of charging is at least 5.5 hours for the first time.
Before you first experience your Zinc Formula E GZ
3series
Folding Electric Scooter, please read
the USER MANUAL thoroughly and learn the basics to ensure your safety and the safety of others.
Failure to follow the basic instructions and safety precautions listed in the USER MANUAL, can lead to damage to your scooter,
other property damage, serious bodily injury and even death.
WARNING
1) Pull up the stem until it clicks and locks into place.
Close the front clasp to confirm it is locked.
2) Manually connect the data cable in the stem tube,
and check it turns on to check the connection.
4) Test the power switch after assembling.
Warning! Upon unpacking, please check the contents against the packing list. Before assembling the scooter, please check
whether the power switch is in the “OFF” position, if not, please put it in the “OFF” position before continuing with assembly.
3) Insert the handlebar into the stem tube, and use
the T-Shaped Allen Key to tighten the six screws.
BEFORE YOU START
Allow at least 5.5 hours for initial charge.
By not doing so you will invalidate the warranty.
Screws x 6
T-shape Allen Key
Need Help? Visit our website for product support www.zincsports.com or email our customer service team