DIGITAL DISPLAY
TYRE INFLATION
Both tyres should have good air pressure, but some air may have escaped.
Please inflate the tyre if it does not have enough air pressure.
Recommended tyre pressure is 45-50psi.
To inflate: remove the dust cap on the wheel valves, and use the valve connector provided,
with a suitable hand/foot pump, to inflate to maximum of 50psi.
Warning: It is very important to regularly check and maintain the tyres as the tyre pressure directly
impacts the safety and performance of the scooter. Don’t over inflate the tyre as excessive tyre
pressure may cause damages to the tyre and wheel, while insufficient tyre pressure may reduce
the maximum speed.
Pump - not included.
Valve connector - included
Service Warning - Please note:
If this light comes on the scooter will require a service.
User should stop using the scooter immediately and contact
Hy-Pro's Customer Service Line +44 (0) 800 731 0006.
Function mode: Cruise mode, Pedestrian mode, Fault prompt, Light.
Speedometer:
Displays the current speed; displays the remaining mileage within
6
seconds after power-on.
Gear mode:
The maximum scooter speed is 3.7mph/6kph for L gear (Pedestrian Mode),
9.3mph/15kph for M gear and 15.5mph/25kph for H gear. Press the Switch Button two times
to change the gear mode.
Battery level:
Each battery level indicates 20% of battery usage. When the last battery
light turns to red, it indicates 10% battery remaining. The battery should be charged as
soon as possible.
Switch Button:
Turn on the scooter – press it once. Change the gear mode – press it 2 times
consecutively. Change the speed unit – press it 3 times consecutively. Turn on/off the front
light – press it once. Turn off the scooter – press and hold for 3 seconds.
Function mode
Gear mode
Speedometer
Battery level
Need Help? Visit our website for product support www.zincsports.com or email our customer service team
7