Instructions for use
3.1. General operation
3
10
Activating the laser
Press the “Start” button to put the laser into operational status.
The operational status of the laser is indicated by the "Ready" message in the
status bar. The “Start” button is inactive, the “Stop” button active.
Starting treatment
Laser power is delivered by pressing the footswitch, and the “Ready” message
changes to “Active”.
The current power delivered in Watts is shown in the bar graph.
Note:
During treatment, the patient must be observed closely and the treatment must
be adjusted if necessary or discontinued should any problems develop.
Summary of Contents for OptonPro
Page 2: ......
