8
3 Proper use
NOTICE
The product is only to be used in its original state with its original accessories, with no unauthorized changes and
within the stipulated parameter limits and operating conditions.
Any other or secondary use is deemed improper.
►
Operate the product only in compliance with the associated installation and operating instructions.
►
Operate the product only when it is in a technical condition that corresponds to the guaranteed parameters
and operating conditions.
Ö
Zimmer GmbH shall accept no liability for any damage caused by improper use. The operator bears sole
responsibility.
• The product is designed specifically for (cooperative/collaborative) use on robot systems and in combination with the
MATCH quick-change system.
• The product is designed exclusively for electric operation using a 24 V DC power supply.
• The product must always be mounted on materials that dissipate heat.
•
The product is intended for industrial use.
• The product is to be used as intended in enclosed rooms for temporary gripping, handling and holding.
• The product is not suitable for clamping workpieces during a machining process.
• Direct contact with perishable goods/food is not permitted.
• Observance of the technical data and of the installation and operating instructions are part of proper use.
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
INSTALLATION AND OPERATING INSTRUCTIONS:
LWR50L-03-00002-A/LWR50L-03-00003-A
DDOC01272 / c
EN / 2023-07-01
