21
10.2 Installing the energy supply
NOTICE
Installation of voltage supply is done internally. This means that the MATCH gripper is equipped with internal
contacts. These contacts transmit all signals.
►
The contacts of the energy supply must be dry, clean and undamaged at all times.
Ö
Damage to the contacts can result in malfunction of the product.
10.3 Static charge
CAUTION
Non-compliance may result in material damage.
Grounding the product is recommended if ESD sensitive parts come into contact with the product.
Grounding is also recommended in applications that require high EMC shielding.
The movement of the gripper jaws creates low voltages as a result of static charging. These charges cannot be dissipated if
the product is mounted on an insulating surface and if discharge is also not possible through the workpiece.
NOTICE
►
Pay attention to the functional ground via the connection point.
1
Connection point
1
INSTALLATION AND OPERATING INSTRUCTIONS:
LWR50L-03-00002-A/LWR50L-03-00003-A
DDOC01272 / c
EN / 2023-07-01
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
