Zimmer GmbH
●
Im Salmenkopf 5
●
77866 Rheinau, Germany
●
Phone: +49 7844 9138-0
●
Fax: +49 7844 9138-80
●
www.zimmer-group.de
DDOC00198/t
EN/2015-10-07
19
INSTALLATION AND OPERATING INSTRUCTIONS:
ELECTRIC GRIPPER GEP/GED5000 SERIES
13. Accessories/scope of delivery
If any accessories not sold or authorized by Zimmer Group are used, the function of the gripper cannot be guaranteed. Zimmer
Group's range of accessories is specially tailored to the individual grippers.
Corresponding optional accessories and those included in the scope of supply can be found at
.
14. Glossary
AC motor
Motor run on AC power
Adjust
Configure
Base position
Base position of the gripper
DC motor
Motor run on DC power
DIR
Direction/24 V supply line
Error
Fault, error message
ESD
Electrostatic discharge, electrostatic sensitivity
GED
Gripper/electrically powered/three-jaw design
GEP
Gripper/electrically powered/2 parallel jaws
GND
Abbreviation for "Ground" – ground connection
LED
Light-emitting diode
NO
"
N
ormally
O
pen" gripper mode – inward gripping - the gripper is open when not activated
NC
"
N
ormally
C
losed" gripper mode – outward gripping - the gripper is closed when not activated
Offset
Correction value
Teach position
Programming/teaching the gripper to the position of the workpiece
Work-Position
Work position of the gripper
VAC
Volts in AC current
VDC
Volts in DC current
Traversing routine
Defined process for the movement of the clamping jaws
Travel path
Path on which the gripper jaws return
