background image

Zimmer GmbH 

 Im Salmenkopf 5 

 77866 Rheinau, Germany 

 Phone: +49 7844 9138-0 

●  

Fax: +49 7844 9138-80 

 www.zimmer-group.de

DDOC00198/t

EN/2015-10-07

10

INSTALLATION AND OPERATING INSTRUCTIONS: 

ELECTRIC GRIPPER GEP/GED5000 SERIES

8.6 

Menu settings

8.6.1 

Menu 1: "Force settings"

  

INFORMATION:

  

For the technical data and gripping force charts, please visit our website:

  

www.zimmer-group.de

  

 Should you have further questions about products or technical data, please contact  ZIMMER GmbH Customer 

Service. For this purpose, please call our technology hotline at 

 +49 7844 9138-0.

8.6.2 

Menu 2: "Width" teach area

GEP5006/GED5006

Teach area

Width [mm]

Teach area "width" [1]

≃ 0,2 mm

Teach area "width" [2]

≃ 0,4 mm

Teach area "width" [3]

≃ 0,6 mm

Teach area "width" [4]

≃ 1,2 mm

Teach area "width" [5]

≃ 2,4 mm

GEP5010/GED5010

Teach area

Width [mm]

Teach area "width" [1]

≃ 0,2 mm

Teach area "width" [2]

≃ 0,4 mm

Teach area "width" [3]

≃ 0,6 mm

Teach area "width" [4]

≃ 1,2 mm

Teach area "width" [5]

≃ 2,4 mm

GEP5008/GED5008

Teach area

Width [mm]

Teach area "width" [1]

≃ 0,2 mm

Teach area "width" [2]

≃ 0,4 mm

Teach area "width" [3]

≃ 0,6 mm

Teach area "width" [4]

≃ 1,2 mm

Teach area "width" [5]

≃ 2,4 mm

Summary of Contents for GED5000 Series




















Reviews: