Operating Instructions
8.2 Notes on Operation
8
Page 12
Therapy
Please hold the handpiece as shown in the picture below.
en
Puls
Version 2.0 works using mechanical energy, which is transferred to the
patient via a handpiece.
In order to achieve this, the handpiece with the applicator head is placed
perpendicular to the treatment area or the point of treatment.
While the radial pulse is enabled, it is possible to work either with the
handpiece stationary on one point, or dynamically, across a whole area.
In order to reduce friction on the skin, the use of the en
Puls
lotion provided is
recommended.
Due to the weight of the handpiece, it is usually not normally necessary to
press down firmly on the treatment area / point.
The handpiece is applied and held in position with the hand in a relaxed
posture.
If required, pressure can also be applied in the direction of the tissue and the
angle of use can be varied.
Caution
!
When using en
Puls
lotion or other lubricants, the applicator head must be
covered using the silicone protection cap.
Note:
Despite the high level of self-damping provided by the weight and the design
of the handpiece, vibrations may cause strain to the hand of the user.
Recommended precautions:
- Restriction of the stress duration
- Passive support
Note:
The patient should be carefully monitored during the treatment.
