Zilan ZLN7604, Instruction Manual

Page: 4 / 37

PLEASE KEEP THESE INSTRUCTIONS
Note this appliance is intended for household use only.
SAVE THESE INSTRUCTIONS
MAIN COMPONENTS
A. Start control
B. Browning control
C. Stop
D. Crumb tray
OPERATION
•
Place your toaster on a flat, dry, stable surface.
•
Plug the toaster in, and adjust it to your required toasting time, using the Browning control (B).
•
Place bread or other food suitable for toasting into the slot, then press down the Start control (A).
•
It will remain down until the bread is toasted.
•
If you wish to stop the toasting process, press the Stop button (C), this will automatically eject the toast, and cancel the heating
elements.
•
If the bread sticks in the toaster, unplug it, wait for it to cool, then remove the bread. NEVER USE METAL UTENSILS TO
REMOVE THE BREAD.
•
After use, screw out the Crumb tray (D), wipe away crumbs using a dry cloth. Insure to insert the crumb tray before using the
toaster again.
•
Always allow at least 1 minute’s cooling time between cycles if toaster is being used more than once at a time.
•
If the lead connecting the toaster to the power supply is damaged, it should only be replaced by a qualified service engineer or
the toaster manufacturer.
•
Must put in the bread when using, the toaster can not be used without bread.
•
This toaster is only for home use.
CLEANING AND CARE INSTRUCTIONS–NOTE THE TOASTER SHOULD BE ALLOWED TO COOL COMPLETELY
BEFORE CLEANING.
•
Do not immerse in water.
•
Unplug from the power outlet (mains).
•
DO NOT use coarse or abrasive sponges/cloths or steel wool to clean the toaster.
•
Never spray or apply cleaner directly onto or into the toaster – cleaner should be applied to a soft cloth.
•
The outside of the toaster should be wiped with a soft, damp cloth, and polished with a soft, dry cloth.
•
After cleaning, wait a few minutes for the toaster to dry completely before use.
•
An authorized service representative should perform any other servicing.
EN
2