TR400
12360-0706-05
Page
6 / 12
www.ziehl.de
6
Assembly
•
mount on 35 mm mounting rail according to EN 60715
•
wall-mount with 3 x screws M4
•
connecting wires refer to the wiring diagram to prevent miss-operation and malfunction.
A circuit-breaker or switch must be situated within easy reach of the
unit and fused. Installation excess current protection should be ≤ 10 A.
7
Putting into operation
Remarks
•
LEDs Alarm
off:
temperature below switching point
on:
temperature beyond switching point
blinking 1x on 4x off:
alarm-relay delay time t
ALARM
is running
blinking 4x on 1x off:
alarm-relay delay time t
ALARM
off is running
blinking 1x on 1x off:
relay locked, ready for reset
Alarm-relay can be resetted with reset-push-button or external contact closed Y1, Y2. A closed contact
or short circuit at terminals Y1-Y2 means no autoreset function.
•
Functions of USB-Stick
With the 2 functions
-
„transfer configuration-file from TR400 to USB-Stick“
-
„transfer configuration-file from USB-Stick to TR400“
settings of a readily configured TR400 can be easily read-out and transferred to other TR400.
The USB-Stick is necessary for configuration and for firmware-updates only.
It may not stay plugged during normal operation.
Select Mode „A“, then choose function with button „Alarm Select“:
Alarm LED 2 = transfer configuration-file from USB-Stick to TR400
Alarm LED 3 = transfer configuration-file from TR400 to USB-Stick
Alarm LED 4 = update of firmware
Attention: As long as TR400 is reading from or writing on the USB-Stick, all relays are released and no
values are measured
The file system on the USB-Stick has to FAT or FAT32. The files must be located in the main directory
(highest level) of the USB-Stick.
Info’s and Download
File for configuration: „TR600.cfg“ / file for firmware-update: „TR600.hex“
On
/ downloads a parameterizing web site is available.
With this help the following activities can be done easily:
- create and change configuration-files
- check downloaded configurations-files
- documentation of configuration-files
You will also find a update instruction and the latest firmware-version there.
!
