ZIEHL MS 220 DA, Operating Instructions Manual

Page: 16 / 48

6 Install the MS 220 DA Option in the Frequency Converter
Before start, disconnect the supply voltage to the frequency converter! Do never install an option card into the frequency converter
while in operation!
The MS 220 DA option is exclusively intended for use in option slot „B“.
- Remove LCP control unit, terminal cover and standard frame (see Photo 1 or 2).
Illustration 6.1: Photo 1 Illustration 6.2: Photo 2
- If necessary, wire the terminal block with terminal 39 - 55 first.
- Insert the MS 220 DA option into slot „B“. (see Photo 3)
Illustration 6.3: Photo 3
Illustration 6.4: Photo 4
Motor Protection MS 220 DA
6 Install the MS 220 DA Option in the Fre-
quency Converter
MG33V102 - VLT ® is a regisered Danfoss trademark
13
6