COSFI100V
12170-0701-04
Page
14 / 28
www.ziehl.de
8
Commissioning
8.1 Program setup
The appropriate program must be set on the COSFI100V correspondent with the application (cosfi or cosfi
plus active current or active current). That is taken care of during commissioning.
Pr
Measured quantity
Limits
1
cos
AL1 and AL2
2
Active current
AL1 and AL2
3
cos
and active current
cos
: AL1, active current: AL2
4
Active current
AL1 and AL2
Adjustment process:
•
Switch off the control voltage on COSFI100V
•
Keep the Set key pressed and switch the control voltage on again
8
Pr1
8
appears in the display after 10s
•
Release the Set key
•
Set the program with the UP/DOWN keys
•
Press the Set key
Device resets and starts
Hint: When changing programs, all parameters of the selected program are reset to "factory settings" (see
table "Factory settings"), only change the parameters after selecting the correct program.