Operating Instructions Z-D-15/35/55E-..
Supervision- and control software
__________________________________________________________
_________________________________________________________________________________
L-BAL-E321-GB 2021/11 Index 002
30/44
6.2.4
System configuration
Overall there are seven pages for adjustment of parameters.
Page
Content (Adjustment of…)
1
Module
2
Phase angle
3
Odd harmonics
4
Even harmonics
5
Sensor-calibration
6
Trouble shooting
7
communication
The description of page 7 „Communication“ is part of in chapter 6.2.3. All others can be found in the
following:
6.2.4.1
Device
This page shows the following adjustments:
Nr.
Name
Description
1
Compensate
priority
Mode of compensation:
H: only Harmonic compensation
HR: compensation of harmonics and reactive power, whereas harmonic
compensation has priority.
HRU: compensation of harmonics, reactive power and phase unbalance,
whereas harmonic compensation has priority.
2
Grid
Frequency
Adjustment to grid frequency: 50hz or 60hz
3
CT Location
Placing of current transformers. Load side (preferred) or grid side.
