Operating Instructions Z-D-15/35/55E-..
General
__________________________________________________________
_________________________________________________________________________________
L-BAL-E321-GB 2021/11 Index 002
5/44
1.5
Intended use
Active harmonic filter are used for reduction of harmonics from for example 6-puls rectifier, frequency
converter or uninterruptible power sources (UPS). Filter are used with further equipment and are
implemented within an electrical system. Active harmonic filter are intended to be installed in an
electrical panel or similar electrical room. Active harmonic filter are not household appliances and may
be considered for commercial use only. Any other use in not allowed.
The manufacturer shall not be liable for any damage resulting from improper use. The user bears the
sole risk.
The intended use also includes:
•
Compliance with technical data, application and performance limits according to the data sheet,
order confirmation and other specifications
•
Compliance with the prescribed intervals for all inspection work
•
Persons performing work completely reading and understanding this documentation and
especially the safety instructions chapter
1.6
Improper use
Any use that is not described in the intended use is improper and therefore impermissible.
The following foreseeable types of misuse are also improper:
•
Unauthorized changes to the active harmonic filter
•
Operating error
•
Improper work on and with the harmonic filter
•
Reversing the current direction of the current transformers
Use:
-
as a safety component or for performance of safety
related functions as defined in EN ISO 13849- 1
-
as an independent household appliance
-
in low voltage systems with special fire risks in compliance with IEC 60364-4-42
-
in explosive atmosphere
-
proximity to flammable substances or objects
-
in open operating rooms
Operation:
-
use outside the operating data approved in the data sheet, the order confirmation and in
other provided specifications
-
in a way that personal injury or material damage may occur in the event of malfunction or
failure
-
with a load that leads to higher power consumption and current values than specified on the
rating plate
-
with vibrations
