Operating Instructions Z-D-15/35/55E-..
General
__________________________________________________________
_________________________________________________________________________________
L-BAL-E321-GB 2021/11 Index 002
4/44
1 General
1.1
Manufacturer
The active harmonic filter is a product of ZIEHL-ABEGG SE. The manufacturer is referred to as ZIEHL-
ABEGG in the remainder of these operating instructions.
ZIEHL-ABEGG SE
Heinz-Ziehl-Straße 74653 Künzelsau
phone: +49 (0) 7940 16-0
[email protected]
http://www.ziehl-abegg.com
Compliance with the following instructions is mandatory to ensure the functionality and safety of the
product. If the following instructions given especially but not limited for general safety, transport, storage,
mounting, operating conditions, start-up, maintenance, repair, cleaning and disposal / recycling are not
observed, the product may not operate safely and may cause a hazard to the life and limb of users and
third parties.
Deviations from the following requirements may therefore lead both to the loss of the statutory material
defect liability rights and to the liability of the buyer for the product that has become unsafe due to the
deviation from the speci
fications.
1.2
Meaning of the instructions
These instructions instruct you on how to use the specified product safely. They include safety
instructions and information that is necessary for fault-free operation.
•
Store the instructions safely on the product for further use. They must be passed on to every
subsequent owner, user or end customer.
•
Ensure that all persons performing activities on the product can easily view the instructions at
any time.
1.3
Validity
This instruction applies to
:
Active harmonic filter: Z-D-15E-..; Z-D-35E-.., Z-D-55E-..
The used active Harmonic Filter is recognizable from the type designation (see rating plate).
These operating instructions apply only to a speci
fic product and under no circumstances to the
complete system.
The instructions contain information for your guidance. No guarantee is provided with regard to the
accuracy of any information and no legal claims may be derived. Reproduction of this information, or
extracts thereof, is allowed only with written approval.
1.4
Terms and definitions
Filter module
For „Filter module Z-D-15/35/55E-..“ the term „Filter module“ or active harmonic filter will be used.
Drive controller
For the non-linear loads which are used together with the power feedback unit in the following the term
„Controller“ is used
Drive system
For a drive system with harmonic filter, power feedback units, controller and other components of the
drive system in the following the term „Drive system“ is used.
