ZIEHL-ABEGG UNIcon, Operating Instructions Manual

Page: 39 / 84

A2 Antiblock
A2 Antiblock
The automatic anti block protection is switched
|
OFF
|
.
To activate the anti block protection, switch to
|
ON
|
.
The settings for this function are made in the following menu items “ FSS Interval ” and
“ FSS Runtime ” .
A2 output curve
A2 output curve
Activate characteristic for A2 =
|
ON
|
( following characteristic points)
A3 Function
A3 Function
Analog output A3 factory setting code
|
1
|
for heating.
Other functions which can be assigned Factory assignments / possible assign-
ments.
A3 Inverting
A3 Inverting
|
OFF
|
= 0...10 V ( factory setting )
|
ON
|
= 10...0 V
Attention: When using output characteristic curve operation without inverting!
A3 Antiblock
A3 Antiblock
The automatic anti block protection is switched
|
OFF
|
.
To activate the anti block protection, switch to
|
ON
|
.
The settings for this function are made in the following menu items “ FSS Interval ” and
“ FSS Runtime ” .
A3 output curve
A3 output curve
Activate characteristic for A1 =
|
ON
|
( following characteristic points)
U1/PWM function
U1/PWM function
Analog output U1/PWM factory setting code
|
0
|
for ventilation.
Other functions which can be assigned Factory assignments / possible assign-
ments.
U1/PWM Invert.
U1/PWM Invert.
|
OFF
|
= 0...100 % PWM ( factory setting )
|
ON
|
= 100...0 % PWM
U1/PWM Antiblock
U1/PWM Antiblock
The automatic anti block protection is switched
|
OFF
|
.
To activate the anti block protection, switch to
|
ON
|
.
The settings for this function are made in the following menu items “ FSS Interval ” and
“ FSS Runtime ” .
Output curve P0
Output curve P0, P1, P2, P3, P4, P5
It is possible to operate with non-linear output characteristic curves for the actuator
outputs.
The curve that is intended to be operated is de
 nedby 6 points (these are then the
same for all connectedcharacteristic curves).
Each point can be set from 0 - 100 %. That means an inversion made in this manner is
also possible.
Operating Instructions UNIcon / Acontrol The Installation menu
L-BAL-E051-GB 1035 Index 003 Part.-No. 00163311-GB
38/83