2.8 Operator
’
s obligation of diligence
•
The contractor or owner must also ensure that the electric systems and equipment
are operated and maintained in accordance with electro-technical regulations.
•
The owner is obliged to ensure that the device is operated in perfect working order
only.
•
The device may only be used as intended (see
“
Application
”
).
•
You must periodically examine the safety equipment for their properly functioning
condition.
•
The assembly instructions and/or operating instructions are always readily available
at the location where the device is being used, are complete and are in legible
condition.
•
These persons are regularly instructed in all applicable questions regarding occupa-
tional safety and environmental protection and are knowledgeable regarding the
assembly instructions and/or operating instructions and, especially, are familiar with
the safety instructions contained therein.
•
All safety and warning notices attached to the device are never removed and remain
legible.
2.9 Employment of external personnel
Maintenance and service work are frequently carried out by external employees who
often do not recognize the speci
fi
c situations and the thus resulting dangers.These
persons must be comprehensively informed about the hazards in their area of activity.
You must monitor their working methods in order to intervene in good time if necessary.
3 Product overview
3.1 Application
With this Gateway (distributed periphery) a MODBUS system with up to 64 members
can be linked to an existing PROFINET system.
3.2 Function
The D-G-64NE acts as a MODBUS master, including autoaddressing of the slaves,
which is controlled by a PROFINET network. Up to 64 MODBUS members can be
connected to the Gateway.
Information
Detail information to the topic "auto addressing" (R-TIL10_17) can be requested over our
support department for control systems - ventilation engineering (V-STE).
Operating Instructions
NETcon
D-G-64NE
Product overview
L-BAL-E273-GB 1631 Index 001
Part.-No.
7/27
