Zida TX-PLE, User Manual

Page: 43 / 47

Q WAKEUP-LINK Heder
The Mainboard provides one WAKEUP-LINK headers (WOL)
used to connect an add-in Network Interface Card which has
Wakeup capability.
q LAN Connector (Only for TX-PLE)
The Mainborad provides a 17-pin LAN Connector for the
Onboard 100Mbps PCI LAN.
S CPU Socket
The Mainboard provides a 370-pin Socket 370 CPU Socket
for intel PIII FCPGA, Celeron FC-PGA / PPGA Processor. The
CPU should have a fan attached to it to prevent overheat. If
a fan is not present, a fan should be installed prior to turning
the system on.
T CPU / SYSTEM FAN Connector
The recommended heatsinks for the processor are those
with 12 Volt three-conductor fans that can be connected to the
fan connector on the mainboard. It provides +12 Volts DC to
the CPU cooling fan as follows:
PIN SIGNAL NAME
1 FAN Speed Detect
2 +12V
3 Ground
Glossary
Mainboard User's Manual
Page 43