Zida TX-PLE, User Manual

Page: 39 / 47

Glossary
Mainboard User's Manual
Page 39
About the Soft Touch Power Button
In an ATX based system, the new soft touch power button
replaces the main power switch that turns your system on and
off. From an OFF state, you can switch the system ON by simply
pressing the power button. From an ON state, the system can
be turned OFF by pressing and holding the power button for
four (4) seconds OR shunt down instantly. The functions of the
power button can also be be altered in the Power Management
section of the CMOS setup.
b AT Power Supply Connector
The Mainboard also provides a 12-pin AT Power supply
connector,which incorporates st/-5V,+/-12V.
C Universal Serial Bus (USB) Header1
The Mainboard provides four 4-pin Universal Serial Bus (USB)
Header. USB is a new interface standard for adding external
Plug-and-Play (PnP) devices to the computer system. Peripherals
that support USB PnP capabilities can operate at up to a
12Mb/sec data transfer rate. Eventually, all external devices
connected to your computer will be standardized to USB.
c Univeral Serial Bus (USB) Header2
Connect this header to the optional USB extension cable for
a USB port.
D Serial (COM1) Header
The Mainboard provides one high-speed 16550 compatible
UART serial ports.