Checking The Package Contents
Remove the items from the box and make sure you have the
following items before beginning. If you are missing any of the
items below please contact the representative for a replacement
part.
ATX
Box Standard Package
1) Mainboard
2) IDE Hard Drive ribbon cable
3) Floppy Drive Ribbon Cable
4) CD-ROM
5) Users Guide
AT
Box Standard Package
1) Mainboard
2) CD-ROM
3) Users Guide
Page
6
Mainboard User's Manual
fast start
installation
This section will aid you in quickly setting up your series
Mainboard, be sure to use caution to avoid personal injury and
damage to wiring due to sharp pins on connector's and printed
circuit assemblies, rough edges and corners and hot components.
Adhere to warnings regarding accessibility into ares designated
only for authorized Technicians.
Your Location Requirements Are:
• A sturdy, level surface for placement
• Space allowance around mainboard
• Room temperature 50 to 90.5 F10 to 325 C Relative
humidity 20/oc to 80
• A stable environment with no abrupt temperature or
humidity changes
• No exposure to chemicals or direct sunlight
• Line voltage and frequency not varying more than + or -1040
from the value stated on the package or nameplate (located on
the back, opposite the power plug)
Auto Jumper. This Mainboard is among our “Auto
Jumper” Series that eliminates the necessity for the user
to be Overwhelmed by jumper settings on the Mainboard.
It is capable of detecting the CPU brand and core voltage
setting the appropriate CPU speed according to the
instructions from the user through the CMOS setup.
Mainboard User's Manual
Page
7
