12
SNE2000G-P and SNE2000G-S
SNE2-A2-ZN13-10
Ethernet RJ45 Pin Assignments
EMI Notices
United States – EMI Notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
The authority to operate this equipment is conditioned by the requirements that no modifications
will be made to the equipment unless the changes or modifications are expressly approved by
Paradyne Corporation.
If the equipment includes a ferrite choke or chokes, they must be installed as described in the
installation instructions.
Canada – EMI Notice
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Table 5:
Ethernet RJ45 Pin Assignments
Pin
Function
Pin 1
Rx+
Pin 2
Rx–
Pin 3
Tx+
Pin 4
not used
Pin 5
not used
Pin 6
Tx–
Pin 7
not used
Pin 8
not used
