8
SNE2000G-P and SNE2000G-S
SNE2-A2-ZN13-10
Connecting the Ethernet Line
Procedure
1
Plug the Ethernet cable into the Ethernet Connection RJ45 port on the back of the
SNE2000G.
2
Verify the connection: solid illumination of the Ethernet Connection Lnk LED on the front
of the SNE2000G indicates a link has been established, if a DSL connection has already
been made. If a DSL connection has not yet been made, the Ethernet link will remain
disabled (as indicated by no illumination of the Ethernet Rx, Tx and Lnk LEDs) until the
SHDSL link has been established.
NOTE: For most applications, the SNE2000G connects to a PC using a straight-through Ethernet
cable and to a hub or a switch using a crossover Ethernet cable.