Zhone EtherXtend 3300 Series, User Manual

Page: 96 / 150

Configuring Bridging
94
EtherXtend User’s Guide
Bridge profile
The following parameters in the bridge interface record are used for Ethernet
COS support.
To display the bridge-record profile, enter show bridge-interface-record :
zSH> show bridge-interface-record
vpi:---------------------------------> {0 - 4095}
vci:---------------------------------> {0 - 65535}
vlanId:------------------------------> {0 - 2147483647}
stripAndInsert:----------------------> false true
customARP:---------------------------> false true
filterBroadcast:---------------------> false true
learnIp:-----------------------------> false true
learnUnicast:------------------------> false true
maxUnicast:--------------------------> {0 - 2147483647}
learnMulticast:----------------------> false true
forwardToUnicast:--------------------> false true
forwardToMulticast:------------------> false true
forwardToDefault:--------------------> false true
bridgeIfCustomDHCP:------------------> false true
bridgeIfIngressPacketRuleGroupIndex:-> {0 - 2147483647}
vlanIdCOS:---------------------------> {0 - 7}
outgoingCOSOption:-------------------> disable all
outgoingCOSValue:--------------------> {0 - 7}
s-tagTPID:---------------------------> {33024 - 37376}
s-tagId:-----------------------------> {0 - 4095}
s-tagStripAndInsert:-----------------> false true
s-tagOutgoingCOSOption:--------------> s-tagdisable s-tagall
s-tagIdCOS:--------------------------> {0 - 7}
s-tagOutgoingCOSValue:---------------> {0 - 7}
Parameter Description
vlanIdCOS Specifies the value loaded into the COS field of the
VLAN header when an untagged packet received on
this interface is tagged (VLAN ID inserted) for
bridging. Value range is 0 to 7. Default is 0.
outgoingCOSOption Specifies whether to insert the VLAN COS bits on
packets bridged through this interface.
Values:
Disable Leave any existing COS values unchanged.
This is the default value.
All Replace the current COS values in all VLAN
headers in tagged and untagged packets originating
and transported through this device.
outgoingCOSValue For outgoing tagged packets, specifies the value used
to overwrite any existing COS value in the VLAN
header. Value range is 0 to 7. Default is 0.