Zhone EtherXtend 3300 Series, User Manual

Page: 72 / 150

EtherXtend SHDSL WAN Interfaces
70
EtherXtend User’s Guide
8 entries found.
To display the PME parameters in their default state, enter get pme-profile :
zSH> get pme-profile 1-1-1-0/shdsl
pme-profile 1-1-1-0/shdsl
efmCuPmeAdminSubType: -----------> {ieee2basetlr}
efmCuPmeAdminProfile: -----------> {0}
efmCuPAFRemoteDiscoveryCode: ----> {}
efmCuPmeThreshLineAtn: ----------> {0}
efmCuPmeThreshSnrMgn: -----------> {0}
efmCuPmeLineAtnCrossingEnable: --> {false}
efmCuPmeSnrMgnCrossingEnable: ---> {false}
efmCuPmeDeviceFaultEnable: ------> {false}
efmCuPmeConfigInitFailEnable: ---> {false}
efmCuPmeProtocolInitFailEnable: -> {false}
efmCuPme2BProfileDescr: ---------> {}
efmCuPme2BRegion: ---------------> {region1}
efmCuPme2BDataRate: -------------> {0}
efmCuPme2BPower: ----------------> {0}
efmCuPme2BConstellation: --------> {adaptive}
efmCuPme2BProfileRowStatus: -----> {active}
efmCuPmeNtr: --------------------> {ntr-local-osc}
For the efmCuPme2BRegion parameter, the regions are set as specified in the
relevant Regional Annex of [G.9991.2]. Regional settings place limitation on
the max allowed data rate, power, and constellation. The possible values for
this parameter are:
•
region 1
Annex A and F (North America)
•
region 2
Annex B and G (Europe)
Regions can only be changed when the link is down.
For the efmCuPme2BDataRate , setting the parameter to 0 sets the data rate to
auto-negotiate. Entering a range between 192 and 5696 defines a specific
range of the data rate.
Table 16 provides the settings for the efmCuPme2BConstellation parameter.
Table 16:
efmCuPme2BConstellaltion settings
Constellation settings Rate range
TCPAM16 192 to 3840
TCPAM32 768 to 5696
Adaptive 192 to 5696