Zhone EtherXtend 3300 Series, User Manual

Page: 91 / 150

Bridging behavior for untagged, tagged, and s-tagged
EtherXtend User’s Guide
89
The global setting specifies that the EtherXtend should send all VLAN
traffic to this port. A VLAN ID can also be used when the EtherXtend
should send only traffic from a specific VLAN ID to this port. It is
recommended not to change the default settings unless advanced bridge
configuration is required.
fm1> get bridge-interface-record 1-1-201-0-efmbond/bridge
bridge-interface-record 1-1-201-0-efmbond/bridge
vpi: ---------------------------------> {0}
vci: ---------------------------------> {0}
vlanId: ------------------------------> {0}
stripAndInsert: ----------------------> {true}
customARP: ---------------------------> {false}
filterBroadcast: ---------------------> {false}
learnIp: -----------------------------> {false}
learnUnicast: ------------------------> {true}
maxUnicast: --------------------------> {100}
learnMulticast: ----------------------> {false}
forwardToUnicast: --------------------> {true}
forwardToMulticast: ------------------> {false}
forwardToDefault: --------------------> {false}
bridgeIfCustomDHCP: ------------------> {false}
bridgeIfIngressPacketRuleGroupIndex: -> {0}
vlanIdCOS: ---------------------------> {0}
outgoingCOSOption: -------------------> {disable}
outgoingCOSValue: --------------------> {0}
s-tagTPID: ---------------------------> {0x8100}
s-tagId: -----------------------------> {0}
s-tagStripAndInsert: -----------------> {true}
s-tagOutgoingCOSOption: --------------> {s-tagdisable}
s-tagIdCOS: --------------------------> {0}
s-tagOutgoingCOSValue: ---------------> {0}
mcastControlList: --------------------> {}
maxVideoStreams: ---------------------> {0}
isPPPoA: -----------------------------> {false}
floodUnknown: ------------------------> {true}
floodMulticast: ----------------------> {true}
bridgeIfEgressPacketRuleGroupIndex: --> {0}
bridgeIfTableBasedFilter: ------------> {NONE(0)}
bridgeIfDhcpLearn: -------------------> {NONE(0)}
Note:
To delete a downlink bridge with a VLAN, the VLAN ID must
be specified in the bridge delete command.
Bridging behavior for untagged, tagged, and s-tagged
This section provides a discussion and examples of various types of bridges
and their settings:
•
Overview on page 90
•
Untagged bridging examples on page 91