Zhone EtherXtend 3300 Series, User Manual, Page: 49 / 150

Device management
EtherXtend User’s Guide
47
management interface is built on the default N2N bond group,
1-1-1-
bondgroupnumber /n2nbond, as a DHCP client using VLAN 7.
Managing EtherXtend using the default management
interface
The MALC that connects to the EtherXtend can be configured as a local
DCHP server or as a client with a bridge to an external DHCP server.
1
Configure Telnet access from the MALC to the EtherXtend by creating a
new dhcp-server subnet 1 on the MALC, with the following parameters:
zSH> get dhcp-server-subnet 1
dhcp-server-subnet 1
network: ---------------> { 10.250.1.0 }
netmask: ---------------> { 255.255.255.0 }
domain: ----------------> {0}
range1-start: ----------> { 10.250.1.1 }
range1-end: ------------> { 10.250.1.250 }
range2-start: ----------> {0.0.0.0}
range2-end: ------------> {0.0.0.0}
range3-start: ----------> {0.0.0.0}
range3-end: ------------> {0.0.0.0}
range4-start: ----------> {0.0.0.0}
range4-end: ------------> {0.0.0.0}
default-lease-time: ----> {-1}
min-lease-time: --------> {-1}
max-lease-time: --------> {-1}
boot-server: -----------> {0.0.0.0}
bootfile: --------------> {}
default-router: --------> { 10.250.1.254 }
primary-name-server: ---> {0.0.0.0}
secondary-name-server: -> {0.0.0.0}
domain-name: -----------> {}
subnetgroup: -----------> { 1 }
stickyaddr: ------------> {enable}
external-server: -------> {0.0.0.0}
2
Create the management interface on the MALC.
zSH> interface add float management 10.250.1.254 255.255.255.0
3 Enter host add on the MALC to configure a host connection between the
EtherXtend and the bond group associated with the management interface
zHS>
host add 1-10-203-0/n2nbond vlan 7 dynamic 1 1
You can now Telnet to the MALC and then Telnet to the EtherXtend
device.
Refer to the MALC documentation for detailed procedures on DHCP
configuration