Zhone 6388-A2 4-Port Wi-Fi with In-Line Filter
User Manual
6
Version 1.0
Document #: BD-ZU0042-10
Installing the Router
Connect the ADSL Line and Telephone
•
Connect one end of an RJ-11 cable from your ADSL connection and the other
end to the LINE port of the router. Use a second RJ-11 cable to connect
between a telephone and the PHONE port of the router.
Connect the PC to the Router
•
To use the Ethernet connection, connect the Ethernet cable from the computer
directly to the router. Connect one end of the Ethernet cable to the port
labeled LAN on the back of the router and attach the other end to the Ethernet
port of your computer.
•
Or, you can use the supplied USB cable to connect your computer directly to
the router. Connect one end of the USB cable to the USB port on the back of
the router and connect the other end to a free USB port on your PC. The Found
New Hardware Wizard will open on your PC. See USB Driver Installation below.
•
If your LAN has more than one computer, you can attach one end of an
Ethernet cable to a hub or a switch and the other to the Ethernet port (labeled
LAN) on the router. Note that either a crossover or straight-through Ethernet
cable can be used. The router automatically recognizes the type of connection
that is required.
Connect the Power Adapter
•
Complete the process by connecting the AC power adapter to the POWER
connector on the back of the device and plug the adapter into a wall outlet or
power strip. Then turn on and boot up your PC and any LAN devices, such as
hubs or switches, and any computers connected to them.
