Zhone 6388-A2 4-Port Wi-Fi with In-Line Filter
User Manual
40
Version 1.0
Document #: BD-ZU0042-10
Tools
This section provides access to the following system commands and functions
—
l
System Commands
l
Remote Log
—
Router
l
User Management
l
Analyzer
l
Ping Test
l
Router Test
System Commands
To make the changes permanent, click on
Tools
(at the top of the page) and select
System Commands
. The following commands are used to configure the router:
a.
Save all:
Press this button in order to permanently save the current
configuration of the router. If you do re-start the system without saving your
configuration, the router will revert back to the previously saved
configuration.
b.
Restart:
Use this button to re-start the system. If you have not saved your
configurations, the router will revert back to the previously saved
configuration upon re-starting. NOTE: Connectivity to the unit will be lost.
You can reconnect after the unit reboots.
c.
Restore Defaults:
Use this button to restore factory default configuration.
NOTE: Connectivity to the unit will be lost. You can reconnect after the unit
reboots.
Remote Log - Router
The remote log feature will forward all logged information to the remote PC. The type
of information forwarded to the remote PC depends upon the Log level. Each log
message is assigned a severity level, which indicates how seriously the triggering event
