Zhone 6388-A2 4-Port Wi-Fi with In-Line Filter
User Manual
35
Version 1.0
Document #: BD-ZU0042-10
Wireless
The Wireless section allows you to configure the router
’
s wireless connection.
Setup
The setup contains the wireless LAN user settings.
Below are the procedures for setting up the configurations
—
l
Enable AP
: Enabling the Access Point (AP) turns on the router
’
s wireless
capability. To use wireless devices, verify that the box is checked.
l
SSID:
Specify the Service Set IDentifier (SSID) for your wireless LAN. It can
be up to 32 characters and cannot include spaces.
l
Hidden SSID
: Enable Hidden SSID by clicking in the check box. When
Hidden SSID is enabled, the SSID is not advertised. Users must know the
SSID to connect to the wireless LAN.
l
Channel B/G:
Specify the RF (Radio Frequency) channel (1
–
11) for the
router to use. Recommended values are 1, 6, and 11. These three values do
not overlap and could be used by three neighboring wireless LANs.
l
802.11 Mode:
Specify whether the router will support only 802.11b (11
Mbps) clients, only 802.11b+ clients (22 Mbps), only 802.11g (54 Mbps)
clients, or all. To allow any client to connect, select Mixed.
l
4X:
Enable 4X mode only if all clients that will connect to the wireless LAN
support 802.11b+.
l
User Isolation:
Select if you want to forbid communications between users
on the wireless LAN.
