Zhone 4821-A2, Installation Manual

Page: 28 / 54

Cabling
28
BitStorm 4800 Express Model 4821-A2 Installation Guide 4821-A2-ZN21-30
Management Port
Port 1 can be used to connect the BitStorm 4800 Express to a network
management system using a 10BaseT or 100BaseT LAN. A straight-through
cable can be used regardless of the destination interface, since the port
automatically distinguishes between an MDI and an MDIX.
To use Port 1 as the out-of-band management port:
1 Connect an 8-position modular cable to Port 1.
2 If the BitStorm 4800 Express is in a rack, fasten the cable to a rail with a
cable tie.
3 Connect the other end of the cable to your Ethernet switch or a network
interface card in a PC.
04-17529
Ethernet Switch
Port 1
PORT1
10/100BT
CONSOLE
PORT2
10/100BT
ST
ATUS
ALARM TEST
DSL PORTS 1-24
25
47
27 29 31 33
35 37 39 41
43 45
26
48
28 30 32 34
36 38 40 42
44 46
1
23
3 5 7 9
11 13 15 17
19 21
2
24
4 6 8 10
12 14 16 18
20 22