Zhone 4821-A2, Installation Manual

Page: 17 / 54

Mounting Configurations
4821-A2-ZN21-30 BitStorm 4800 Express Model 4821-A2 Installation Guide
17
Mounting Configurations
Three basic installation configurations are available:
z
Rack mount – see Installing the Brackets for Rack Mounting on page 17
and Installing the BitStorm 4800 Express Into a Rack on page 19 .
z
Wall mount – see Installing the BitStorm 4800 Express on a Wall on
page 21 .
z
Shelf or desktop – see Installing the BitStorm 4800 Express on a Shelf or
Desktop on page 23 .
Mounting Brackets
Your BitStorm 4800 Express can be installed in a rack or on the wall using
mounting brackets. Two brackets suitable for a 19-inch (483 mm) rack
(marked EIA-19) and two brackets suitable for a 23-inch (584 mm) Bay
Networks or Nortel rack (marked with Paradyne Part Number
868-6282-0020) are shipped with the unit. Two brackets suitable for a 21-inch
(535 mm) rack (marked ETSI) are available from Paradyne as a separate
feature (see
Appendix B-, Equipment List ).
Rack-mounting brackets may also be used to attach the unit to a wall.
NOTE:
In this guide, the term rack refers to any rack, cabinet, frame, or bay
suitable for mounting telecommunications equipment.
Installing the Brackets for Rack Mounting
To install the mounting brackets for rack mounting:
1 Locate the black screw nearest the front panel on each side of the unit, as
shown.
2
Remove these two black screws (one from each side) before attempting to
install the mounting brackets.
04-17525
POTS 1-24
PORT1
10/100BT
CONSOLE
PORT2
10/100BT
S
TAT
U
S
ALARM
TEST
DSL PORTS 1
-24
25
47
27 29 31 33
35 37 39 41
43 45
26
48
28 30 32 34
36 38 40 42
44 46
DSL PORTS 2
5-48
1
23
3 5 7 9
11 13 15 17
19 21
2
24
4 6 8 10
12 14 16 18
20 22