Zhone 4821-A2, Installation Manual

Page: 30 / 54

Cabling
30
BitStorm 4800 Express Model 4821-A2 Installation Guide 4821-A2-ZN21-30
Connecting a Modem to the Console Port
To connect a modem to the CONSOLE port:
1
Determine and procure the proper DCE cable type for your modem. The
CONSOLE port requires a DB9 plug connector. The other connector
depends on the serial port on your modem, but normally a DB25 plug is
required. The cable must be an EIA-232-E crossover (null modem) cable.
2
Connect the DB9 plug connector to the CONSOLE port socket.
3
If the modem will be permanently connected, fasten the connector to the
Management Module with its captive screws. If the BitStorm 4800
Express is in a rack, dress the cable to the left and attach it to the rail with
a cable tie.
4
Connect the other end of the cable to the serial port of your modem.
04-17531
TST
LINE
ALM
PWR
ETHERNET
Serial Port
Modem
CONSOLE
Port
PORT1
10/100BT
CONSOLE
PORT2
10/100BT
ST
ATUS
ALARM TES
T
DSL PORTS 1-24
25
47
27 29 31 33
35 37 39 41
43 45
26
48
28 30 32 34
36 38 40 42
44 46
1
23
3 5 7 9
11 13 15 17
19 21
2
24
4 6 8 10
12 14 16 18
20 22