Zhermack elite mix, User Manual

Page: 23 / 36

121 of 264
MAINTENANCE AND USE MANUAL
elite mix
EN
Figure
10
Fig. 10:
When using the elite mix always select a
recipient of a suitable size and prepare the material
to be mixed. To obtain a good final result pre-mix
by hand.
time mixing 00:00
time mixing 05:00
time mixing 05:00
P06 Abcde 06
pre-mix time 00
P06 Abcde 06
pre-vac time 00
P06 Abcde 06
reverse time 00
P06 Abcde 06
rpm 350
P06 Abcde 06
time mixing 00:00
P06 Abcde 06
time mixing 00:00
d2
d3
d4
d5
d6
d2.1
d2.2
d2.3
d1
3
2
Figure
9
Fig. 9: Select the programme and press the dial ( 2 ).
With the Programme Name flashing against a black
background ( d1 ), rotate the dial ( 2 ) to go to the
“Mixing time” parameter ( d2 ); press the dial ( 2 ) to go
to modification of parameter (
d2.1
): rotate the dial to
set the value ( d2.2 ) and press again to
confirm ( d2.3 ).
Parameters relative to mixing speed ( d3 ), pre-mixing
(
d4
), pre-vacuum time (
d5
) and the rotation inversion
interval ( d6 ) can be programmed in a way similar way
to the “Mixing time" example.
Parameter Description Range
from to
Unit of
Measure
Step Default Notes
Mixing Time Mixing Duration 00:00 - 05:00 min:sec 1 sec 00:00 .
Mixing Speed Motor Speed 100 - 450 rpm 10 350 .
Pre-mixing Time dedicated to
pre-mixing at 100
rpm
0 - 25 sec 5 0 Can be activated or
deactivated (by setting
to 0)
Pre-vacuum time Time interval from
achievement of
constant in-cup
vacuum to start of
mixing
2 - 60 sec 1 0 Can be activated or
deactivated (by setting
to less than 2)
Inversion interval Sets time after
which the direction
of spatula rotation
is inverted
2 - 30 sec 1 0 Inversion is
deactivated by setting
to less than 2 seconds