22 of 36
MAINTENANCE AND USE MANUAL
DUNE
Before using the
DUNE
it is always advisable to apply the protective adhesive
sheet on the inner side of the glass screen (15); this prevents wear and
maintains optimum visibility.
1
0
3
2
28
Figure
7
Fig. 7 :
Use the switch (
28
) to select the desired
operation:
0.
n
eutral
position
position
1.
leFt
Cylinder
position
2.
Central
Cylinder
position
3.
riGHt
Cylinder
14
15
Figure
6
Fig. 6 :
Open the glass hatch (
15
) by pulling the
lower edge upwards.
Position the item to be sandblasted inside the
sandblasting chamber.
Close the hatch, making sure it rests properly on the
seal (
14
).
3
4
1
21
22
33
Figure
5
Fig. 5 :
Reposition the lids (
3, 21
and
1
) on both
cylinders (
4, 22
and
33
): screw on clockwise.
Clean any residual sand off the rim of
the tanks before repositioning the lids.
It is forbidden to mix sands of different particle size: observing this rule will
prevent the fine sand cylinder (with correspondingly narrow nozzle outlet) from
being “contaminated” with large-grain sand: any such contamination would
certainly obstruct the nozzles and seriously damage the equipment. For the
same reason it is forbidden to recycle sand used during previous work sessions.
Summary of Contents for dune 2
