Zhermack dune 2, Maintenance And Use Manual

Page: 10 / 36

10 of 36
MAINTENANCE AND USE MANUAL
DUNE
Before using this equipment or carrying out any work on it, the operator must
read the entire contents of this manual. This manual has been drawn up to
provide the user with essential information on rational, safe utilisation of the
equipment. The user must comply with the information given at all times.
Furthermore, the user must use the work sheets enclosed with this manual so
as to keep a record of maintenance/component replacement work as well as
make notes on any equipment malfunctions.
The operator-user must only use the equipment when it is fully assembled and
the safety devices are working properly as described in this manual.
2.4
GENERAL SAFETY REGULATIONS
The operator must read the advice and warnings given below and comply with such regulations
at all times: doing so will ensure safe, long-lasting equipment performance:
• Do not allow untrained personnel to use this equipment.
• Ensure that the work area is properly prepared: it must be free from obstacles, clean and
properly illuminated.
• Take measures to ensure that you are not distracted when using the equipment.
• In the event of a malfunction follow the advice given in this manual: if you have any doubts
shut down the equipment and contact your Authorised Service Centre immediately.
• Never use a malfunctioning equipment and always inform the Maintenance Manager of any
faults.
• Do not open compartments containing electrical parts.
• Do not replace the power lead or tamper with the supplied plug.
• To replace a damaged or worn foot control unit lead and/or the pedal switch itself contact an
Authorised Servicing Centre only.
• It is forbidden to use the equipment on items other than those for which it has been specifically
designed.
• Before doing any cleaning, routine and/or unscheduled maintenance work make sure that the
equipment has been unplugged from the mains socket.
• Make sure that there are no foreign objects inside the work area as these could damage the
equipment and/or injure personnel.
• Do not use petrol or flammable solvents as detergents; use only non-flammable, non-corrosive,
and non-toxic substances (see paragraph 8.1).
• Do not used compressed air to clean small pieces; if you do so you should protect your eyes
with goggles that provide lateral protection and limit air pressure to a maximum of 2 bar.
2.3
AUTHORIZED PERSONNEL